How To Pair Lorex Mc2232 Camera To Receiver

Wireless Security Photographic camera

CAUTION: TO REDUCE THE RICK OF ELECTRIC Daze DO NOT REMOVE Cover. NO USER SERVICABLE PARTS Inside. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT Burn OR Daze HAZARD, Do NOT EXPOSE THIS UNIT TO RAIN OR Moisture.

Important Safeguards

In improver to the careful attention devoted to quality standards in the manufacture process of your product, safety is a major factor in the design of every instrument. Yet, safe is your responsibleness too. This sheet lists important information that will help to ensure your enjoyment and proper use of the product and accessory equipment. Please read them carefully before operating and using your product.

Full general Precautions

1. All warnings and instructions in this transmission should exist followed.
2. Do not utilize receivers or video monitors in humid or wet places.
3. Keep enough space around the product for ventilation. Slots and openings in the storage chiffonier should not be blocked.
4. It is highly recommended to connect the product to a surge protector to protect from damage acquired by electrical surges. It is also recommended to connect the product to an uninterruptible power supply (UPS), which has an internal battery that will proceed the product running in the issue of a power outage.
5. Remove the plug from the outlet earlier cleaning. Do not employ liquid aerosol detergents. Use a water dampened cloth for cleaning.

Installation

1. Read and Follow Instructions – All the safety and operating instructions should be read earlier the product is operated. Follow all operating instructions.
2. Retain Instructions – The safety and operating instructions should exist retained for future reference.
3. Heed Warnings – Comply with all warnings on the production and in the operating instructions.
4. Polarization – Do not defeat the safety purpose of the polarized or grounding-type plug.
   A polarized plug has 2 blades with one wider than the other.
   A grounding type plug has 2 blades and a 3rd grounding prong.
   The broad blade or the tertiary prong are provided for your rubber.
   If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
5. Ability Sources – This production should be operated only from the type of ability source indicated on the marking label. If you are not sure of the type of ability supplied to your location, consult your video dealer or local power company. For products intended to operate from battery ability, or other sources, refer to the operating instructions.
6. Overloading – Exercise not overload wall outlets or extension cords as this can result in the chance of fire or electrical shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or croaky wire insulation, and broken plugs are dangerous. They may outcome in a stupor or burn hazard. Periodically examine the string, and if its advent indicates damage or deteriorated insulation, have information technology replaced by your service technician.
7. Ability-Cord Protection – Power supply cords should exist routed then that they are not probable to be walked on or pinched past items placed upon or confronting them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
8. Surge Protectors – It is highly recommended that the video equipment be connected to a surge protector. Doing and then will protect the equipment from damage caused past power surges. Surge protectors should bear the UL listing mark or CSA certification mark.
9. Uninterruptible Ability Supplies (UPS) – Because this product is designed for continuous, 24/seven functioning, it is recommended that you connect the product to an uninterruptible power supply. An uninterruptible power supply has an internal battery that will continue the production running in the issue of a power outage. Uninterruptible ability supplies should conduct the UL list mark or CSA certification marker.
   Circumspection: Maintain electrical safety. Ability line operated equipment or accessories connected to this product should bear the UL listing marking or CSA certification marking on the accessory itself and should not be modified so as to defeat the prophylactic features. This will help avoid whatever potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel.
10. Ventilation – Slots and openings in the case are provided for ventilation to ensure reliable functioning of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video equipment on a bed, sofa, rug, or other like surface. This product should never be placed near or over a radiator or heat register. This product should not exist placed in a congenital-in installation such as a bookcase or rack unless proper ventilation is provided and the product manufacturer'south instructions have been followed.
11. Attachments – Do not use attachments unless recommended past the product manufacturer equally they may cause a chance.
12. Water and Moisture – Do non utilise receivers or video monitors near water — for example, about a bath tub, wash basin, kitchen sink or laundry tub, in a wet basement, near a swimming pool and the like.
13. Heat – The product should exist situated abroad from heat sources such as radiators, estrus registers, stoves, or other products (including amplifiers) that produce heat.
14. Accessories – Exercise non place this video equipment on an unstable cart, stand, tripod, or table. The video equipment may autumn, causing serious damage to the production. Use this product just with a cart, stand, tripod, bracket, or tabular array recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and utilize a mounting accompaniment recommended past the manufacturer.
15. Camera Extension Cables – Check the rating of your extension cable(due south) to verify compliance with your local authority regulations prior to installation.
16. Mounting – The cameras provided with this system should be mounted but as instructed in this guide or the instructions that came with your cameras, using the provided mounting brackets.
17. Camera Installation- Cameras are not intended for submersion in water. Not all cameras can exist installed outdoors. Check your camera environmental rating to confirm if they tin be installed outdoors. When installing cameras outdoors, installation in a sheltered surface area is required.

Service

1. Servicing – Do not attempt to service this video equipment yourself, as opening or removing covers may expose you to unsafe voltage or other hazards. Refer all servicing to qualified service personnel.
2. Atmospheric condition Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following weather:
   A. When the power supply cord or plug is damaged.
   B. If liquid has been spilled or objects have fallen into the product.
   C. If the product has been exposed to rain or water.
   D. If the product has been dropped or the cabinet has been damaged.
   East. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may consequence in damage and will ofttimes require extensive work past a qualified technician to restore the product to its normal operation.
   F. When the production exhibits a distinct change in performance. This indicates a need for service.
3. Replacement Parts – When replacement parts are required, have the service technician verify that the replacements used have the aforementioned safety characteristics as the original parts. Use of replacements specified by the product manufacturer can forestall fire, electric stupor, or other hazards.
4. Safe Check – Upon completion of any service or repairs to this production, ask the service technician to perform safety checks recommended by the manufacturer to determine that the production is in safe operating condition.

Use

1. Cleaning – Unplug the product from the wall outlet before cleaning. Do not apply liquid cleaners or aerosol cleaners. Employ a damp cloth for cleaning.
2. Product and Cart Combination – Product and cart combination should be moved with intendance. Quick stops, excessive force, and uneven surfaces may crusade the product and cart combination to overturn.
3. Object and Liquid Entry – Never button objects of any kind into this production through openings equally they may impact dangerous voltage points or "short-out" parts that could result in a fire or electric shock. Never spill liquid of whatever kind on the production.
4. Lightning – For added protection of this product during a lightning tempest, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cablevision system. This will prevent harm to the product due to lightning and power line surges.

NOTICES

FCC Notice:

This equipment has been certified and institute to comply with the limits regulated by the FCC part fifteen, subpart C. Operation is subject to the following two conditions: (i) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and plant to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency free energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, at that place is no guarantee that interference will not occur in a detail installation. If this equipment does crusade harmful interference to radio or television reception (which can exist determined by turning the equipment on and off), the user is encouraged to effort to correct the interference by i or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio or television set technician for aid

Warning: To ensure compliance with the FCC's RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm (7.87in) between the radiator and nearby persons.

Industry Canada Notice:

This device complies with Industry Canada licence-exempt RSS standard(south). Performance is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
This Class B digital appliance complies with Canadian ICES-003.

MODIFICATION:

Any changes or modifications not expressly approved by the grantee of this device could void the user'due south authority to operate the device.

RoHS:

This production is fully compliant with the European Union Restriction of the Use of Certain Chancy Substances in Electric and Electronic Equipment ("RoHS") Directive (2002/95/EC). The RoHS directive prohibits the sale of electronic equipment containing sure hazardous substances such as atomic number 82, cadmium, mercury, and hexavalent chromium, PBB, and PBDE in the European union.

Information technology is imperative that the user follows the guidelines in this manual to avert improper usage which may result in damage to the production, electric shock, and burn chance injury. In order to improve the features, functions, and quality of this production, the specifications are subject to change without notice from fourth dimension to time.

Features

• Real-fourth dimension (up to 30fps) wireless video with MPEG-4 compression @ 640×480 (VGA) resolution1
• Extended bandwidth delivers super smooth high frame rate video1
• SignalGuard Technology continuously monitors the wireless signal and automatically reconnects upon detecting depression betoken strength
• Next generation adaptive Frequency Hopping Spread Spectrum (FHSS) engineering greatly reduces conflicts with competing signals
• Built-in microphone for heed-in audio2
• Built-in car-mechanical infrared camera filter achieves authentic colour reproduction in varying lighting weather
• Night vision range upwardly to 135ft (41m) / 90ft (27m)iii
• Simple installation. No video cable required4
• Weatherproof camera and power connectors, can exist installed indoors or outdoors5
• Hands connects to any surveillance DVR (BNC) or Goggle box (RCA)
• High gain antennas provide up to 165ft (50m) indoor / 500ft (152m) outdoor wireless range6
• Vandal resistant camera design with cablevision laissez passer-through mounting subclass

1. At total indicate strength. Limit number of obstructions to ensure best operation.
2. Audio recording without consent is illegal in certain jurisdictions. Lorex Technology Inc. assumes no liability for use of its products that does not ostend with local laws.
3. Stated IR illumination ranges are based on ideal conditions in typical outdoor night fourth dimension ambient lighting and total darkness. Actual range and epitome clarity depends on installation location, viewing area and low-cal reflection/absorption level of object.
4. Camera and receiver requires a wired connection to an electrical outlet (power adapters included).
5. Not intended for submersion in water. Installation in a sheltered area required.
6. Maximum wireless transmission range. Actual range dependent upon edifice materials and other obstructions in path of wireless indicate.

Getting Started

Wireless Receiver

• Removable Antenna (SMA Blazon): Pre-attached to the receiver
• Pairing Status LED: Glows green continuously when a photographic camera is paired to the receiver. Flashes on and off slowly when pairing mode is active and flashes quickly when camera is out of range.
• Pairing Button: For details, see Pairing Cameras
• DC Power: Connect ability adapter to power on the receiver.
• Termination Cable: Includes BNC video output cable and RCA audio output.
• Antenna Jack

Wireless Photographic camera

1. Microphone
2. Removable Antenna (SMA Blazon): Pre-fastened to the back of camera.
3. Photographic camera Stand
4. DC Power: Connect ability adapter to ability on the photographic camera.
5. Pairing Push: For details, see "Pairing Cameras" on page 9.
6. Antenna Jack

Attention – This photographic camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal and indicates that the camera filter is working.

Installing the Camera

Camera is suitable for outdoor installation. Installation in a sheltered location is recommended. For example, install under shelter protected from the elements, such equally beneath roof eaves. The diagram to the right shows an example of an ideal location for outdoor placement.

Installation Warnings

• Aim the camera to optimize the viewing area: select a location that provides a clear view of the surface area you lot want to monitor, that is free from dust, and that is not facing a strong light source or straight sunlight.
• Avoid installing the camera where at that place are thick walls or obstructions betwixt the photographic camera and the receiver.
• Avoid installing in a location which requires the wireless signal to laissez passer through cement, concrete, and metal structures. This will reduce the range of transmission. For details, see "Appendix B: Frequently Asked Questions" on page 11.
• Select a location for the camera that has an ambience temperature between fourteen°F~122°F (-x°C~50°C)
• Not intended for submersion in water. For outdoor utilise, installation in a sheltered location is recommended.

Mounting Positions

Yous may mount your camera on a wall, ceiling, or counter. See the images below for recommended configurations of the camera stand up and antenna.

NOTE: For ceiling installation, position the antenna as loftier as the ceiling allows. See the "Ceiling" mounting position in the effigy above.

Before mounting the camera permanently, advisedly program where and how the camera will be positioned and where you will road the cable that connects the camera to the ability adapter. Verify the camera's performance by observing the image on a monitor when the camera is positioned where it will exist permanently installed.

To Install the Camera

1. Use the included mounting screws to mountain the camera to the mounting surface:
   1. Mark the positions of the screw holes on the mounting surface.
   2. Drill holes and insert the drywall plugs (included) every bit needed.
   3. Firmly attach the camera to the mounting surface using the included screws.
      NOTE: If you are running the power cable through the mounting surface, connect power before firmly attaching the photographic camera to the mounting surface.
      NOTE: If you are running the power cable along the mounting surface, you need to run the power connector cablevision through the cable notch on the photographic camera base before firmly attaching the camera to the mounting surface.
2. Loosen the thumbscrews (i, 2) and the adjustment ring (3) by turning them counter clockwise.
3. Adjust the angle of the camera until the desired view is set. Tighten the thumbscrews and the adjustment ring to secure the camera'southward position.
4. Connect the ability cable from the camera to the weatherproof ability connector. Plug the power adapter into a power outlet or surge protector. NOTE: Power cables are just weatherproof when fully inserted at the connection betoken. Power cables may not be submerged in water.
5. Remove protective film from the camera lens to uncover the microphone. The protective motion-picture show may prevent the microphone from working if not removed.

Connecting to a DVR

Before powering on the receiver, make sure to commencement connect and power on the camera. This will ensure a proper connection.

1. Connect the BNC video cable from the receiver to the video input on your DVR.
2. Connect the RCA sound cablevision from the receiver to the corresponding audio input. The audio input number or proper name should lucifer the video input where y'all connect the BNC cable (e.g. Video Input 1 and Sound Input 1).
3. Connect the ability cable to the power port on the receiver and plug information technology into a power outlet or surge protector.
4. Place the receiver where it will take clear reception to your camera1.
   Annotation: If your camera is out of range, the pairing status LED will wink on and off speedily. OPTIONAL: Use the double-sided tape to secure the receiver to a surface (east.g. wall).

Connecting to a TV

1. Connect the included BNC-to-RCA adapter to the BNC connector on the receiver. Connect the other end of the BNC-to-RCA adapter to the RCA video input on your idiot box.
2. Connect the RCA audio connector from the receiver to the audio input on your boob tube.
3. Connect the power cable to the ability port on the receiver and plug it into a power outlet or surge protector.
4. Power on your telly and select the input that the receiver is connected to.
5. Place the receiver where it volition have clear reception to your camera1.

Pairing Cameras

IMPORTANT: The camera and the receiver have already been paired out of the box, which means that they are exclusively communicating with each other. If for some reason the pairing is lost, follow these steps to pair the camera and receiver.

To pair the photographic camera to the receiver:

1. Brand sure that the photographic camera and receiver are both powered up and all antenn
   as are properly attached.
2. Press and hold the PAIR push on the receiver for v seconds to activate pairing way.
   The pairing status LED will flash on and off slowly.
3. Printing the PAIR button on the back of the photographic camera within 30 seconds of pressing the PAIR button on the receiver.
   If pairing is successful, alive video from the camera will announced on the monitor.

Appendix A: Arrangement Specifications

General Specifications

TX Frequency Range	ii.400GHz~2.480GHz
TX Power	16dBm
Unobstructed Effective Range	165ft (50m) indoor 500ft (152m) outdoor1
Information Rate	four Mb/s
Modulation	GFSK
Spread Spectrum	FHSS
Operating Temperature Range	14°F ~ 122°F / -ten°C ~ forty°C

Maximum wireless transmission range. Actual range dependent upon building materials and other obstructions in path of wireless betoken.

Receiver Specifications

RX Sensitivity	-81dBm
Demodulation	GFSK
Supported Resolution	VGA (640×480) up to 30 frames per second
Termination	1x BNC video, 1x RCA sound
Power Requirement	9V DC +/- five%
Power Consumption	270mA Max
Dimensions (West x D 10 H)	53 10 137 x 86mm / two.ane x 5.4 ten iii.4″ (with antenna attached)
Weight	0.1kg / 0.3lbs

Camera Specifications

Image Sensor Blazon	i/4″ Color CMOS Image Sensor
Effective Pixels	H: 640 V: 480
Epitome Compression	MPEG4
Image Resolution	VGA (640×480)
Lens	3.6mm F2.0
Field of View (Diagonal)	55°
AGC	On
Power Requirement	9V DC +/- 5%
Power Consumption	430mA Max with IR LED 220mA Max without IR LED
Environmental Rating1	IP66
IR LED Quantity / Type	24 pieces / 850nm
Nighttime Vision Range2	135ft (41m) / 90ft (27m)
Built in Motorcar IR Turn On / Off	CdS Drive Auto IR LED plow On/Off Circuit
Dimensions (W x D ten H)	79 x 203 x 117mm / 3.1 x 8.0 x 4.6″ (with antenna and lord's day- shade)
Weight	0.3kg / 0.6lbs

1. Not intended for submersion in Installation in a sheltered expanse recommended.
2. Stated IR illumination ranges are based on ideal conditions in typical outdoor night time ambient lighting and in total darkness. Bodily range and image clarity depends on installation location, viewing area, and low-cal reflection / absorption level of OBJECT.

Appendix B: Oftentimes Asked Questions

 Wired vs. Wireless Cameras

A wired camera has a video cable that transmits the video signal from the photographic camera to a recording or viewing device.
A wireless camera does not use a video cable. Instead, it wirelessly transmits the video signal to a wireless receiver that is continued to your DVR. Wireless cameras do not require video cabling to exist run between the camera and the DVR, which reduces installation time and cost.

Does a wireless photographic camera require power?

Aye. Wireless cameras crave two ability sources: one continued to the photographic camera, and the other to the receiver. The term "wireless" refers to the lack of a video cable betwixt the camera and the receiver.

How far tin can a wireless camera transmit a video indicate?

In an open field (with line of sight), a typical wireless camera has a range between 250 – 500 anxiety. 'Line-of-sight' ways that there are no obstructions between the camera and receiver. Obstructions include walls, buildings, trees, and certain electronic devices. Materials containing wet (for example, leaves) may also deed as an obstruction. Cubical walls, drywall, drinking glass, and windows by and large practice not dethrone wireless bespeak strength.
In a airtight environment—such as the interior of a house—the wireless camera range is between 100 – 165 feet. The betoken range varies depending on the type of edifice materials or objects the wireless indicate must pass through. The bespeak range also depends on whether there are competing signals using the same frequency equally the photographic camera. For case, signals from cordless phones or routers may touch on bespeak strength. Adaptive Frequency Hopping Spread Spectrum (FHSS) technology featured in the latest Lorex models greatly reduce signal interference.

Range Limiting Factors1

Signal Reduction Through Materials

Point force decreases as it passes through unlike types of cloth. The table beneath shows how signals become reduced when passing through unlike materials:

Material	Signal Reduction (%)
Plaster & Woods	x – 30%
Brick	30 – fifty%
Concrete Cinder Blocks	50 – 70%
Metal & Metal Cladding	70 – 90%

Annotation:  Signals that must pass through wet or moist fabric (east.grand. shrubs and trees) may be significantly reduced.
The stronger the bespeak strength, the higher the video frame charge per unit. The lower the betoken strength, the lower the video frame rate.

Are digital wireless photographic camera signals secure?

Yes. Lorex digital wireless products characteristic a wireless transmission method chosen Frequency Hopping Spread Spectrum (FHSS). This type of signal is highly resistant to eavesdropping every bit it generates a channel hopping sequence using an algorithm generated by the receiver, which only the camera tin follow through the "pairing" part.
Pairing is an electronic handshake between digital wireless devices. Digital wireless cameras can only be paired to i receiver. This is to forbid interception past tertiary parties, and prevents any other device from picking up the signal—this also ways that yous cannot pair ane camera to multiple receivers.

How many frames per second should I expect from a digital wireless photographic camera?

Current Lorex digital wireless cameras offer 10 – 30 FPS (Frames Per 2nd) performance. Bodily frame rate depends mainly on bespeak force (see the chart in section in a higher place).
For details on supported resolutions and frame rates for this model, run across "Appendix A: System Specifications" on page 10.

How many wireless cameras tin can I install?

It is recommended to install a maximum of four wireless cameras per system (4 receivers and 4 cameras). Minimum space between receivers should be four inches / 10cm and minimum infinite between cameras should be 6.5ft / 2m to minimize potential signal strength degradation.

Appendix C: Troubleshooting

If y'all have problems with your arrangement, there is frequently a quick and elementary solution. Delight endeavor the following:

Problem	Solution
There is no flick from the camera(s)	•  Make certain that the camera is plugged into a ability outlet and that the power adapter is plugged in properly. •  Make sure receiver is plugged into a power outlet. •  Movement the camera closer to the receiver. •  Brand sure BNC video output cable is connected to your DVR or television. •  If you are viewing your photographic camera(s) using a Television receiver, brand certain you lot take the correct input selected.
There is no audio from the camera(s)	•  Make sure the RCA sound output cablevision is connected to your DVR or tv audio input. •  Make sure audio recording is enabled on your DVR. See your DVR manual for farther instruction. •  Make sure to remove the protective motion-picture show from the camera lens. The microphone is located on the front end of the camera and will not work properly if the protective film is left on.
The pic is dropping	•  Move the photographic camera closer to the receiver. •  Try repositioning the camera, receiver, or both to improve the reception.
The picture is or has go choppy	•  The picture may become inclement when experiencing a lower frame rate (east.g. half-dozen frames per second vs. a higher 20 frames per second). •  Try moving the camera closer to the receiver. •  Remove obstructions between the receiver and camera.
The picture is white	•  "Washout" or "white wash" tin can occur when a strong calorie-free source is pointed at the camera lens. The camera lens is non harmed during a white wash. •  Do not signal your camera towards a bright light source.
The picture is too dark	•  If using during the 24-hour interval, the camera may not be getting enough light. Reconsider the position of your camera.
The picture is too bright	•  If using during the day, the camera may be getting as well much low-cal. Reconsider the position of your camera.
Dark vision is not working	•  Nighttime vision activates when light levels drop. The area may take as well much light.
Brilliant spot in video when viewing camera at nighttime	•  Night vision reflects when pointing a camera at a window. Motion the camera to a different location.

Appendix D: Extending Wireless Signal Range

DISCLAIMER: Certain accessories are not available in all markets. At that place are several ways to heave your wireless signal equally well equally options to help y'all extend the range of the wireless bespeak.
Clear Line-of-Sight: You should always try to ensure there is a clear line-of-sight between the camera and the receiver.

Extending Your Wireless Signal

Even with a clear line-of-sight between your photographic camera(southward) and your receiver(s), you may experience a lower video frame rate just due to the distance between your wireless devices.
Accessory antennas are available that can aid extend the range of your wireless signal.

GHZ Directional Wireless Panel Antenna

Use the 2.4GHz Directional Wireless Panel Antenna
(model #: ACCANTD9) to focus a wireless signal onto the camera in order to increase the range of manual
(clear line-of-sight betwixt the camera and the antenna is required). A 20ft extension cable is included to help to properly position the antenna.

Scenario 1: Single Receiver Installation

Attach a directional antenna to the camera and/or the receiver. It is recommended to attach the antenna to the receiver and place it in a location that has clear line-of-sight to the camera. Ensure that the directional antenna is pointing toward the other antenna. For example, if the directional antenna is continued to your receiver, the directional antenna should point at the camera (see figure above). During the installation, cheque the reception on your DVR.

Scenario ii: Multiple Photographic camera / Receiver Installation

If you are using multiple wireless cameras and receivers in your installation, adhere directional antennas to the photographic camera(s) and receiver(south) that are farthest away from each other. Follow these guidelines to increase the indicate strength between your cameras and receivers:

• Indicate directional antennas towards the receiver for each camera.
• Keep every bit much infinite as possible between each receiver.
• Keep as much infinite as possible between directional antennas if using more one.
• Minimize the amount of obstructions (e.m. walls or trees) between the antennas and receivers.
• During the installation, check the reception of each camera on your DVR.

Visit world wide web.lorextechnology.com for more details on wireless antennas and accessories.

Lorex LW2231 Wireless Security Photographic camera Instruction Manual – Download [optimized]
Lorex LW2231 Wireless Security Camera Instruction Manual – Download

Source: https://manuals.plus/lorex/lorex-lw2231-wireless-security-camera-manual

Posted by: lefebvreyorshoweaged50.blogspot.com

Share this post